-
1.2738/P20+Ni/718 Alloy Tool Steel Plate for Plastic Mould
1.2738 die steel is a kind of die steel produced according to German DIN standard. It has relatively superior mechanical properties and good machinability in similar grades of steel. It is mainly used in the processing and production of hot working dies, among which plastic dies are the most widely
-
20-800mm*2200*6000 Carbon Steel 34cr2ni2mo Steel Alloy Structural Steel Flat Bar
34cr2ni2mo structural steel is characterized by high strength, toughness, good hardenability and stability against overheating, but it has high white spot sensitivity and temper brittleness. The weldability is poor. It needs high temperature preheating before welding and stress relief after welding.
-
12cr1MOV/35CrMo/30Cr2Ni2Mo/34cr2ni2mo/25cr2ni4MOV Structrual Alloy Steel Bar Steel Plate
1. Normalizing: 920 ± 10 ºC for 7-8h air cooling2. Tempering: 650 ± 10 ºC for 7-8h air cooling2.Heat Treatment Process1. Normalizing: 920 ± 10 ºC for 7-8h air cooling2. Tempering: 650 ± 10 ºC for 7-8h air cooling3.ApplicationMolds for corrosive plastic
-
Tool/Alloy/Carbon Steel 25cr2ni4MOV Plate Deformed Flat Steel Bar Steel Sheet
1. Normalizing: 920 ± 10 ºC for 7-8h air cooling2. Tempering: 650 ± 10 ºC for 7-8h air cooling2.Heat Treatment Process1. Normalizing: 920 ± 10 ºC for 7-8h air cooling2. Tempering: 650 ± 10 ºC for 7-8h air cooling3.ApplicationMolds for corrosive plastic
-
Tool Steel 35CrMo Pipe/Steel Sheet/Steel Plate/Flat Bar Structural Alloy Steel
35CrMo is the specification number of alloy structural steel (alloy quenched and tempered steel). This steel is mainly used for manufacturing important parts of various machines that bear impact, bending and torsion, and high load2.Fabrication and Heat TreatmentIt is used to manufacture important pa
-
12crmo / 15CrMo / 35CrMo / 42CrMo4 /12cr1MOV Low Alloy Structure Steel Plate
12Cr1MoV alloy steel is mainly used after normalizing and high temperature tempering to manufacture superheated steel pipe, guide pipe, serpentine pipe and other corresponding forgings with working temperature not exceeding 570 ~ 585 ºC in high pressure equipment.2.Fabrication and Heat Treatmen
-
12cr1MOV Structural Alloy Steel Seamless Boiler and Heat Exchanger Tube
12Cr1MoV alloy steel is mainly used after normalizing and high temperature tempering to manufacture superheated steel pipe, guide pipe, serpentine pipe and other corresponding forgings with working temperature not exceeding 570 ~ 585 ºC in high pressure equipment.2.Fabrication and Heat Treatmen
-
Low Price Inconel 686/2.4606 Super Nickel Cold Rolled Plate
Basic Info. Model NO. inconel 686