• Model NO.：Inconel 625
• Special Use：High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application：Tool Steel Bar
• Lead Time：Stock
• Size：Customized
• Transport Package：Plastic Wraping
• Specification：DN10~450
• Trademark：without
• Origin：China
• HS Code：76210000
• Production Capacity：30000PCS,Month

UNS N06625 Chemical Composition%          Alloy DesignationElementCNiCrMnFeSiMoAlTiCo+TaPSInconel 625Min. %-5820---8--3.15--Max. %0.1-230.550.5100.40.44.150.0150.015 
 Mechanical PropetiesInconel625Density:8.4g/cm3Melting Point: 1290-1350°cTensile Strength Min.(Mpa):690Yield Strength Min. (MPa): 0.2% offset276Elongation A 5%(min.): 30HB Max.:220 
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process: 
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end 

Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
 
Inspection and Test Procedure1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material2.100% Dimension & Visual Examination 3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test  (ET or UT) 5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)6.Straightness Test  (optional)7.Roughness Test (optional)8.Intergranular Corrosion Test(optional)9.Impact Test (optional)10.Grain Size Determinations (optional)NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. 
>>Seamless Pipe Production Facilities
 
>>Production Process
 
>>Laboratory Instrument  & Test Equipment