• Model NO.：KM-170317
• Size：8-100mm
• Thickness：2-30mm
• Grade：E235, E355,St35, St37-2, St37.4, St52, St52-3, St5
• Processing Way：Cold Drawn or Cold Rolled
• Product Application：Auto Industry,for Machinery Use,Oil Cylinder Tube
• Package：in Bundle
• Transport Package：in Bundle
• Specification：8mm~100mm
• Trademark：Kingmetal
• Origin：Made in China
• HS Code：73043190
• Production Capacity：500~1000 Tons Per Month

+CCold drawn / hard+LCCold drawn / soft+SRCold drawn and stress relieved+ABright annealed+NBright normalized 
The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment, and it shall be such that any surface imperfections such as ridges, dents or shallow grooves requiring dressing can be identified.
 
Any surface imperfections, whose depth cannot be clearly identified, or,
It shall be permissible to dress, only by grinding or machining, surface imperfections provided that, after doing so, the dimensions are within the specified tolerances. All dressed areas shall blend smoothly into the contour of the tube.
Surface imperfections which encroach on the specified minimum wall thickness shall be considered defects.
 
The tubes shall have smooth outer and inner surface. The roughness Ra shall be:
≤4 μm on the outer and inner surface of tubes in the delivery conditions +C and +LC.
≤4 μm on the outer surface of tubes in the delivery conditions +SR, +A and +N.
 
The tubes are tested by means of following norms
EN10002-1
EN10233
EN10234
EN10246-1
EN10246-3
EN10246-7
 
Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.
The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases
The case is most suitable for hanging by forklift.