How to install tap water filter
As people pay more attention to healthy drinking water, the installation of tap water filters has become a hot topic recently. This article will introduce you to the installation steps, precautions and FAQs of the tap water filter in detail to help you complete the installation easily.
1. Preparations before installation
Before installing a tap water filter, you need to make the following preparations:
| steps | Description |
|---|---|
| 1. Choose the right filter | Choose the appropriate filter type (such as pre-filter, ultrafiltration membrane filter, RO reverse osmosis filter, etc.) according to household water needs. |
| 2. Check the installation environment | Make sure the installation location has enough space and is close to water sources and drains. |
| 3. Prepare tools | Wrenches, screwdrivers, raw tape, measuring tools, etc. |
2. Installation steps
The following are detailed installation steps for tap water filters:
| steps | Operating Instructions |
|---|---|
| 1. Turn off the water supply | Close the main water valve to ensure there is no water leakage during installation. |
| 2. Install the pre-filter | Install the pre-filter after the main water valve to filter large particles of impurities. |
| 3. Connect the main filter | Connect the main filter and pre-filter according to the instructions, paying attention to the direction of water inlet and outlet. |
| 4. Install drain pipe | Connect the drain hose to the wastewater outlet of the filter and make sure it drains smoothly. |
| 5. Check the tightness | Open the water valve, check whether each interface is leaking, and seal it with raw material tape if necessary. |
3. Precautions
When installing a tap water filter, pay attention to the following:
| Things to note | Description |
|---|---|
| 1. Replace the filter element regularly | The filter element has a limited service life and needs to be replaced regularly according to the frequency of use. |
| 2. Avoid direct sunlight | The filter should be installed in a cool place to avoid direct sunlight that may cause material aging. |
| 3. Clean regularly | The pre-filter needs to be cleaned regularly to maintain the filtration effect. |
4. Frequently Asked Questions
The following are questions and answers frequently encountered by users:
| question | Answer |
|---|---|
| 1. The water outlet becomes smaller after the filter is installed. | It may be that the filter element is clogged. It is recommended to replace the filter element or clean the pre-filter. |
| 2. Water leakage after installation | Check whether the joint is tight and seal it with raw material tape if necessary. |
| 3. The filter is noisy | The water pressure may be too high. It is recommended to install a pressure reducing valve. |
5. Summary
Installing a tap water filter is not complicated and can be done easily as long as you follow the steps and pay attention to details. Regular maintenance and replacement of filter elements are key to ensuring long-term effective use of the filter. I hope this article can help you solve the problems during the installation process and enjoy healthy and pure drinking water.
check the details
check the details
en
